Garage Door Spring Repair & Replacement Services

Garage door springs act as the mechanical counterbalance for your entire overhead door system. A standard residential garage door weighs anywhere from 150 to over 300 pounds. Counterbalance springs store mechanical kinetic energy to make the door feel weightless, allowing a small motorized opener or human hand to effortlessly lift and lower the assembly.

When a spring snaps—frequently accompanied by a loud gunshot-like sound—that counterbalance disappears instantly. Attempting to lift the door with the electric opener after a spring has broken can strip opener drive gears, bend top panel sections, or burn out the motor.

Our technicians work with both primary counterbalance configurations:

• Torsion Springs: Mounted on a steel torsion shaft horizontally above the garage door opening. When wound, they store rotational torque. Technicians inspect the center bearing plate, end bearing brackets, winding cones, and stationary cones.
• Extension Springs: Mounted along the upper horizontal guide tracks on either side of the door. They stretch as the door closes. Technicians verify safety containment cables running through the center of extension springs to prevent dangerous projectile recoil if a spring snaps.

We install oil-tempered, high-cycle replacement springs engineered for 20,000 to 25,000+ opening cycles, substantially exceeding standard builder-grade hardware.

Torsion springs are held under hundreds of pounds of kinetic mechanical torque. Adjusting or replacing them requires specialized hardened steel winding bars, strict safety protocols, and calibrated torque math based on the door’s exact wire gauge, inner diameter, and overall weight.

Using makeshift tools like screwdrivers or adjustable wrenches can cause catastrophic slippage, leading to severe fractures or impact injuries. For safety, always allow experienced technicians with proper safety gear to handle spring replacements.